46 Programmable Components
6 Programmable AI Modules
Low-latency HD FPV
Scratch & Python Coding
4WD Omnidirectional Movement
Intelligent Sensing Armor
Multiple Exciting Battle Modes
Innovative Hands-On Learning
Camera FOV:120°
Camera Max Still Photo Resolution:2560×1440
Camera Max Video Resolution: (FHD) 1080/30fps; (HD) 720/30fps
Camera Max Video Bitrate: 16 Mbps
Camera Photo Format: JPEG
Camera Video Format: MP4
Camera Sensor: CMOS 1/4″; Effective pixels: 5 MP
Camera Operating Temperature Range: -10 to 40 °C (14 to 104 °F)
Narrow Infrared Units Effective Range [1]: 6 m (in indoor lighting conditions)
Narrow Infrared Units Effective Area: Varies from 10° to 40°Effective area decreases as distance from the target increases.
Wide Infrared Units Effective Range [1]: 3 m (in indoor lighting conditions)
Wide Infrared Units Effective Width: 360° (in indoor lighting conditions)
Hit Detector Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.
Hit Detector Maximum Detection Frequency: 15 Hz
S1 Weight: Approx. 3.3 kg
S1 Dimensions: 320×240×270 mm (length × width × height)
S1 Chassis Speed Range: 0-3.5 m/s (forward)0-2.5 m/s (backward)0-2.8 m/s (sideways)
S1 Max Chassis Rotational Speed: 600°/s
M3508I Brushless Motor Max Rotational Speed: 1000 rpm
M3508I Brushless Motor Max Torque: 0.25N·m
M3508I Brushless Motor Max Output Power: 19 W
M3508I Brushless Motor Operating Temperature Range: -10 to 40 °C (14 to 104 °F)
M3508I Brushless Motor Driver: FOC
M3508I Brushless Motor Control Method: Closed-loop speed control
M3508I Brushless Motor Protection: Overvoltage protectionOvertemperature protectionSoft-startShort-circuit protectionChip and sensor anomaly detection
Blaster Controllable Launching Frequency: 1-8/s
Blaster Max Launching Frequency: 10/s
Blaster Initial Launching Speed: Approx. 26 m/s
Blaster Average Load: Approx. 430
Gimbal Controllable Range: Pitch: -20° to +35°Yaw: ±250°
Gimbal Mechanical Range: Pitch: -24° to +41°Yaw: ±270°
Gimbal Max Rotational Speed: 540°/s
Gimbal Vibration Control Precision (on the flat surface and with the Blaster idle): ±0.02°
Intelligent Controller Latency [2]: (Connection via Wi-Fi) 80-100ms; (Connection via Router) 100-120ms (unobstructed, free of interference)
Intelligent Controller Live View Quality: 720p/30fps
Intelligent Controller Max Live View Bitrate: 6 Mbps
Intelligent Controller Operating Frequency [3]: 2.4 GHz, 5.1 GHz, 5.8 GHz
Intelligent Controller Operating Mode: Connection via Wi-Fi, Connection via Router
Intelligent Controller Max Transmission Distance [4]: (Connection via Wi-Fi) FCC, 2.4 GHz 140 m,5.8 GHz 90 mCE, 2.4 GHz 130 m,5.8 GHz 70 mSRRC, 2.4 GHz 130 m,5.8 GHz 90 mMIC, 2.4 GHz 130 m; (Connection via Router) FCC, 2.4 GHz 190 m,5.8 GHz 300 mCE, 2.4 GHz 180 m,5.8 GHz 70 mSRRC, 2.4 GHz 180 m,5.8 GHz 300 mMIC,2.4 GHz 180 m
Intelligent Controller Transmission Power (EIRP): (2.400-2.4835 GHz) FCC: ≤30 dBm; SRRC: ≤20 dBm; CE: ≤19 dBm;MIC: ≤20 dBm; (5.150-5.250 GHz) FCC: ≤30 dBm; SRRC: ≤23 dBm; CE: ≤20 dBm; MIC: ≤23 dBm; (5.725-5.850 GHz) FCC: ≤30dBm; SRRC: ≤30dBm; CE: ≤14 dBm
Intelligent Controller Transmission Standard: IEEE802.11a/b/g/n
Intelligent Battery Capacity: 2400 mAh
Intelligent Battery Nominal Charging Voltage: 10.8 V
Intelligent Battery Maximum Charging Voltage: 12.6 V
Intelligent Battery Battery Type: LiPo 3S
Intelligent Battery Energy: 25.92 Wh
Intelligent Battery Weight: 169 g
Intelligent Battery Operating Temperature Range: -10 to 40 °C (14 to 104 °F)
Intelligent Battery Charging Temperature Range: 5 to 40 °C (41 to 104 °F)
Maximum Charging Power: 29 W
Battery Life in Use: 35 minutes (measured at a constant speed of 2 m/s on a flat surface)
Battery Life on Standby: Approx. 100 minutes
Charger Input: 100-240 V, 50-60Hz, 1A
Charger Output: Port: 12.6 V=0.8A or 12.6 V=2.2A
Charger Voltage: 12.6 V
Charger Rated Voltage: 28 W
Gel Bead Diameter: 5.9-6.8 mm [2]
Gel Bead Weight: 0.12-0.17 g [2]
App: RoboMaster
iOS: iOS 10.0.2 or later
Android: Android 5.0 or later
Recommended Routers: (China)TP-Link TL-WDR8600; TP-Link TL-WDR5640; (International) TP-Link Archer C7; NETGEAR X6S
Recommended outdoor power supply solution for routers: Laptop Power Bank (match the input power of the router)
Supported SD Cards: Supports microSD cards with a capacity up to 64GB
Notes:
1. Use of the infrared units will be affected in outdoor or infrared-intensive environment.
2. Measured in an interference-free and unobstructed environment with a distance of approximately one meter between the mobile device, the router, and the S1. The iOS device used was an iPhone X. The results of testing with different Android device may be different.
3. Outdoor use of the 5.1 GHz and 5.8 GHz frequency bands is prohibited in some areas. Always follow all local laws and regulations in your country or region.
4. Measured in an interference-free and unobstructed environment. For Connection via Wi-Fi, the mobile device used for testing was a sixth-generation iPad (released in 2018). For Connection via Router, several router models were used for testing. FCC: TP-Link Archer C9; SRRC: TP-Link WDR8600; CE: TP-Link Archer C7; MIC: WSR-1160DHP3.
5. The gel beads will swell to a usable size after being soaked in water for four hours.
DJI RoboMaster S1 Educational Robot x 1
Chassis Front Armor x 1
Mecanum Wheel Mounting Plate x 1
Mecanum Wheel Damping Ring x 4
Mecanum Wheel Roller x 48
Tube of Grease x 1
Motion Controller x 1
Bottle of Gel Beads x 1
Screwdriver Handle x 1
M3508I Brushless Motor and ESC x 4
Motor Mounting Plate x 4
Screw Box x 1
Safety Goggles x 1
X-Shaped Front Shaft Cover x 1
Cable Retainer x 1
Intelligent Battery Charger x 1
Intelligent Battery x 1
AC Power Cable x 1
Left-Threaded Inner Hub x 2
Left-Threaded Outer Hub x 2
Right-Threaded Inner Hub x 2
Right-Threaded Outer Hub x 2
Damping Ring Bracket x 4
Chassis Cabin Cover x 1
Masking Tape x 1
Vision Markers x 7
Chassis Cover x 1
Chassis middle frame x 1
Intelligent Controller x 1
Front Axle Cover x 1
Front Axle Module Base x 1
Gimbal x 1
Camera x 1
Blaster x 1
Gel Bead Container x 1
Speaker x 1
Hit Detector x 4
Camera Cable x 1
Data Cable (35 cm) x 1
Data Cable(23 cm) x 2
Data Cable (12 cm) x 4
Chassis Rear Armor x 1
Chassis Left Armor x 1
Chassis Right Armor x 1
12 Months